> I have a SCSI card, which lspci says is an "Adaptec AHA-2940U/UW/D /
> AIC-7881U (rev 01)". It uses aic-7xxx.o . Its external port has 50(?
> 68?) contacts. I don't know what it's called, but it's short and wide, and
> it looks like a mating plug is held into it by hooks, a pair on each end.
It's a SCSI II Connector, should be 50 pins, if it's 68 pins it's WIDE,
Ultra or something.
> I also have a Microtek Scanmaker II, which has a
> Centronics 50 on it, which usually connects to the host through a cable
> whose other end is a DB-25. Those cables are easy to find; I have several.
> How would I connect this scanner to my computer?
You would acquire a cable with a SCSI II Connector on one end (that fits the
card) and a centronics 50 on the other end.
--
73 (= Best Regards) de: Ron ka4inm@tampabay.rr.com
100% LINUX, since July, 1997 SENT Time and Date are UTC
Visit my HAM Web SITE at: www.qsl.net/ka4inm
NO anti-virus crap used here ever!
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 20:22:57 EDT